Operating Your Refrigerator; Freezer Temperature Control - Danby Designer DFF100C2WDD Guía De Utilización Y Cuidado Para El Propietario

Refrigerador sin escarcha
Ocultar thumbs Ver también para DFF100C2WDD:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instructions
OPERATING YOUR
REFRIGERATOR
Temperature
Température
Fig. 2
Fig. 3
OPERATING
FREEZER
COMPARTMENT
MIN
Fig. 4

Freezer Temperature Control

REFRIGERATOR TEMPERATURE CONTROL
• There is a digital temperature display panel in the REFRIGERATOR com-
partment (See Fig.2.). The digits on the upper line are in degrees Celsius,
while the bottom digits are in degrees Fahrenheit.
• Press the "-" sign or "+" sign to reach the desired temperature.
• The first time you turn the unit on, please select 2°C/36°F and let the unit
run for at least 2 hours before putting food inside. This will ensure the refrig-
erator compartment is thoroughly chilled before food is put in. The recom-
mended factory setting is 4°C / 39°F.
NOTE:
• If the unit is unplugged, you must wait 3 to 5 minutes before restarting the
unit (plugging the unit back in). If you attempt to restart before 3 to 5 minutes,
the refrigerator will not start.
• If the power goes out, the unit should restart itself when the power comes
back on.
• Large amounts of food will lower the cooling efficiency of the appliance.
• Do not place food so that it blocks an air vent, and leave adequate space
between food items for air flow in the cabinet.
• Allow several hours for temperature to stabilize between two
temperature selections.
• Selecting different temperatures on the refrigerator digital temperature
display, will affect the temperature in BOTH the fridge and the freezer compart-
ments.
FREEZER TEMPERATURE CONTROL
• Your refrigerator has one vent control for regulating the temperature in the
freezer compartment (See Fig.4.). The temperature control is located on the
center of the freezer compartment's interior back panel.
• The first time you turn the unit on, adjust the temperature control knob to
"MAX" and let the unit run for at least 2 hours before putting food inside. This
will ensure that the freezer cabinet is thoroughly chilled before food is put in.
• The FREEZER temperature control ranges from "MIN" (the warmest) to
"MAX" (the coldest). Adjust this control to get the desired temperature. The rec-
ommended factory setting is MEDIUM (half way between "MIN" and "MAX").
THE FREEZER COMPARTMENT
MAX
• This compartment is designed for the long-term storage of frozen food.
Storage time period is up to three months.
• The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
• Place frozen food into the freezer as quickly as possible after purchase. If
there are instructions on the package, carefully follow these
instructions regarding storage times.instructions regarding storage times.
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dff100c2bsldd

Tabla de contenido