Sleep Timer Operation - Brandt BCR173 Manual De Instrucciones

Checking alarm time
Press and hold AL1 or AL2 for 2 seconds, the alarm time will flash on the
display.
To turn off the alarm
the set time on the following days.
To cancel the alarm,
light goes out on the display.
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes
once the alarm is activated. When the snooze button is pressed, the buzzer or
radio alarm sounds will stop and sound again after about 9 minutes.

SLEEP TIMER OPERATION

The sleep function is designed to automatically turn off the Radio.
Setting sleep timer
1. Press SLEEP.
 "90" will illuminate on the display.
2. Repeatedly press SLEEP to select the desired sleep time from 90, 80, 70,
60, 50, 40, 30, 20 or 10 minutes.
3. The radio will be turned off after the selected time has elapsed.
To check remaining sleep time
To cancel sleep timer,
selected.
To turn off the radio before the sleep time has elapsed,
POWER.
Specifications
Power source:
Power consumption (clock only): < 1W
Frequency range:
Power Output :
Clock backup: 2 x 1.5V AAA size batteries (not included)
Alternating Current
EN
, press POWER and the alarm will come on again at
repeatedly press AL1 or AL2 until the alarm indicator
,
press SLEEP.
press SLEEP until "OFF" is
AC 230V~ 50Hz, 5W
AM 522-1620 kHz
FM 87.5 – 108 MHz
0.3W RMS
EN-5
press