Preparation For Use - Sylvania 6615VD El Manual Del Propietario

PREPARATION FOR USE

LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the proce-
dure below.
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel) ▲ or ▼ button to point to "[ENG]".
5) Select "ENG"(English), "ESP"(Spanish) or "FRA"(French)
by using the VOL(ume) ▲ or ▼ button.
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button.
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears
on the TV screen.
3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO".
Then, press the VOL(ume) ▲ button.
The tuner scans and memorizes all active channels in your area.
The TV distinguishes between standard TV channels and cable (CATV)
●
channels.
When AUTO MEMO action is completed, the lowest memorized channel reappears on the
●
screen.
When you press the CH(annel) ▲ or ▼ button after selecting AUTO MEMO,
●
the tuner will stop at the memorized channels only.
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If
●
this happens, try the AUTO MEMO action again when reception conditions are better.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲ button.
OPERATIONS
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) ▲ or ▼ button.
3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function allows you to have the POWER automatically turn
off after a set time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
2) You may change the sleep time by pressing the SLEEP
button on the remote control repeatedly. The timer can be
set up to 90 minutes, 10 minutes each time the SLEEP
button is pushed. (The timer display counts up and sleep
timer will be displayed on the screen when you press the
SLEEP button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
: Press the VOL(ume) ▲ or ▼ button.
PICTURE PICTURE
CHANNEL SET CHANNEL SET
[ENG] / ESP / FRA [ENG] / ESP / FRA
V-CHIP SET UP V-CHIP SET UP
CAPTION [OFF] CAPTION [ C1]
TV SOUND [MAIN] TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
ADD/DELETE
AUTO MEMO
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0" is displayed.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point
to "CAPTION".
3) Press the VOL(ume) ▲ or ▼ button to select
the mode you wish.
4) When done, press the MENU button to exit
the menu.
PICTURE PICTURE PICTURE
CHANNEL SET CHANNEL SET CHANNEL SET
[ENG] / ESP / FRA [ENG] / ESP / FRA [ENG] / ESP / FRA
V-CHIP SET UP V-CHIP SET UP V-CHIP SET UP
CAPTION [ C2] CAPTION [ T1] CAPTION [ T2]
TV SOUND [MAIN] TV SOUND [MAIN] TV SOUND [MAIN]
3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4) Use the CH(annel) ▲ or ▼ button to select the channel you wish to put
into memory or to erase from memory.
Note: The display will return to the normal screen automatically in about
10 seconds.
Perform "ADD/DELETE" function while this display appears on the screen.
Press the VOL(ume) ▲ or ▼ button to light up the channel number
●
in LIGHT BLUE if you wish to add the channel into memory.
Press the VOL(ume) ▲ or ▼ button to light up the channel number
●
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
MTS (Multi-Channel Television Sound) System
You can listen to a program in MTS stereo by following the steps below.
Menu Menu
Selection Selection
MAIN MAIN
Type of Type of
broadcast broadcast
Regular Regular -None- -None-
Stereo Stereo
STEREO STEREO
broadcast broadcast
SAP SAP MAIN MAIN
[To Select STEREO, MONO or SAP in Stereo broadcast]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point to "TV SOUND".
3) Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode. ([MAIN], [MONO] or
[SAP])
: Press the VOL(ume)
PICTURE
Type of CHANNEL SET
[ENG] / ESP / FRA
broadcast
V-CHIP SET UP
Regular
CAPTION [OFF]
TV SOUND [MAIN]
Stereo
broadcast
SAP
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
PICTURE ADJUSTMENT
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the VOL(ume)
TURE" is selected.
3) Press the CH(annel) ▲ or ▼ button to select
"MANUAL". Then, press the VOL(ume) ▲
button.
4) Select the feature you wish to adjust with
the CH(annel) ▲ or ▼ button and adjust it
with the VOL(ume) ▲ or ▼ button.
: Press the CH(annel) ▲ or ▼ button.
SLEEP 10
[-] [+]
BRIGHT
Note:
In the above steps, the picture adjustment display will disappear from the TV screen automati-
●
cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume)
▲ button so that "PICTURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeatedly
until the display returns to the screen.
[USING THE GAME BUTTON]
You can set the Game mode and external input mode at the same time by pressing the GAME but-
ton on the remote control. "GAME" appears on the TV screen.
To exit the Game mode and external input mode, press the GAME button on the remote control
●
again.
To cancel the Game mode only, adjust the picture control. In this case, "VIDEO1" instead of
●
"GAME" appears on the TV screen.
If you press the GAME button when the TV is off, the TV turns on and will be in the Game
●
mode and external input mode automatically.
MONO MONO SAP SAP
-None- -None- -None- -None-
MONO MONO STEREO STEREO
MAIN MAIN
SAP SAP
▲ or ▼ button.
Menu
Selection PICTURE
MAIN MONO
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
-None- -None- -None-
CAPTION [ C1]
TV SOUND [MONO]
STEREO STEREO
MONO
MAIN
MAIN
▲ button so that "PIC-
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
[-] [+] [-] [+]
CONTRAST COLOR
ADD/DELETE
AUTO MEMO
To show the status, press the
DISPLAY button on the remote
control.
SAP: Second Audio Program,
which means your program, can
also be received in a second lan-
guage or sometimes a radio station.
PICTURE
SAP
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ C2]
TV SOUND [SAP]
SAP
VOL(ume) VOL(ume)
to decrease to increase
brightness brightness
to decrease to increase
contrast contrast
to pale to brilliant
to purple to green
to soft
to clear
[-] [+] [-] [+]
TINT SHARPNESS