Maintaining Your Iron; Cleaning The Soleplate; Using The Self-Cleaning Feature - Sunbeam EURO PRESS 4041 Manual De Instrucciones

maintenance
Maintaining Yo u r E

Cleaning the Soleplate

Clean the soleplate if starch or other residue
accumulate.
To clean the Soleplate:
Allow the iron to cool and then wipe it
1.
with a soft, damp cloth.
WARNING: DO NOT use abrasive cleansers,
scouring pads or vinegar to clean the soleplate.
This will damage the finish.
Run the iron over an all-cotton cloth to remove
2.
any residue.

Using the Self-Cleaning Feature

You should use the self-cleaning feature to maintain
the optimal performance of your iron. The self-
cleaning feature will clean the water reservoir and
steam vents of accumulated minerals, dust and lint.
In general, clean the iron:
• if the steam vents clog up,
or
• once a month if you have hard water,
or
• once every two months if you have soft water.
To use the self-cleaning feature:
Set the Steam Dial to ZERO and
1.
the Fabric Select Dial to MIN.
P ™ I r on
U RO RESS
11