Ironing; Dry Ironing; Steam Ironing - Sunbeam EURO PRESS 4041 Manual De Instrucciones

I r oning

Dry Ironing

Make sure that the Steam Dial is set to ZERO.
1.
Plug the cord into a 120 volt AC outlet.
2.
The Power Indicator will light.
Turn the Fabric Select Dial to the dry ironing
3.
fabric setting you desire and allow the iron to
heat for 2 minutes. While the iron is heating,
make sure it is sitting on its heel rest on a
stable, protected surface.
Tip: Refer to the Ironing Guide on Page 15
for the recommended setting for your fabric.

Steam Ironing

Follow the instructions for "Filling
1.
the Water Reservoir" on Page 5.
Plug the cord into a 120 volt AC outlet.
2.
The Power Indicator will light.
Turn the Fabric Select Dial to the steam ironing
3.
fabric setting you desire (Linen, Cotton, Wool
and allow the iron to heat for 2 minutes.
or Silk)
While the iron is heating, make sure it is sitting
on its heel rest on a stable, protected surface.
Tip: Refer to the Ironing Guide on Page 15
for the recommended setting for your fabric.
After the iron has heated (2 minutes), turn
4.
the Steam Dial to desired steam setting.
6

ironing