Configuration - ivo NE131 Manual De Instrucciones

Configuration

press simultaneous
and
simultaneous
Display examples
Scaling factor
Mode
14
Setting of Functions
In the configuration menu you will see the function
settings that are effective when turning the counter
on for the first time (factory setting). Here you may
also effect the best setting for your task. The follo-
wing table indicates how to access the configuration
menu as well as how to select functions.
Hint Access may be protected by a code.
Please refer to menu line no. 42.
Key Functions
Key Function
Call or exit configuration menu.
(Code is indicated on display.)
If no code is entered, quit only
Enter and confirm access code, e.g. 11.
or Select menu line number
or Start entry and select digit (digit starts to blink).
or Enter function value and/or function number.
Confirm entry.
Reset to default settings: Keep button pressed
and connect unit to the mains. Display: CLrPro
Configurations Display
Here the display indicates the menu line number
as well as the function value and/or the function
number, all at one glance.
Menu line no.
1.0000
21
0
22
NE131
Function value:
0.0001 ... 9999.99
Function no:
0 = adding
1 = subtracting