How To Use - EQUATION DF-HT5C09P Instrucciones De Montaje, Utilización Y Mantenimiento

FR
3. INSTALLATION
ES
Your appliance shall be used as portable appli-ance only (thanks to
PT
respect all the safety warn-ings given below)
Carefully put the machine on the stable oor at the correct side.
IT
Let a minimum distance of 1m between any side of your appliance and
EL any obstacle (furnitures or walls, for example) to allow a good circulation
of the air ow.
PL
Always direct the air ow in order to optimize the heating of the room.
Avoid the corners, small volumes, wood oors, ceiling, etc...
RU
UA

4. HOW TO USE

RO
EN
USE
- Plug the appliance to a 220-240V~ 50Hz socket with earthing connection
- To start the heater, push the -/o switch located at the back of the appliance. You will hear a
"BE BE" sound and the power indicator
Mode
- Push the Stand by button
- There is a tip-over switch inside the heater, it will disconnect the heater automatically if the
machine falls down on the ground.
HEATING
- Press the button
or
- To turn o your heater anytime press the Stand By Button
stop and the fan will operate for approx 30 seconds allowing your heater to cool down
before switching o .
TIMER
- In working condition, press
a) When entering into timer setting mode, the time indicator will be on, the LED light will
to active the heater.
to choose the power I(1500W), power II(2500W), LED indicates
.
lights up. The machine enters to Standby
key to set the time.
67
, the heating element will