How To Use - EQUATION KPT-2000B 5208L Instrucciones Legales Y De Seguridad

2. INDOOR USE ONLY
To hang you heater on the wall:
Drill two holes at the level of the slots located at the back of the heater
then put two pegs in the holes.
Hang the heater to the wall by inserting the two screws into the slots of
the back panel of the heater the fix the screws on the pegs.
Always be sure that the heater is correctly fixed and stable after
performing the installation.
Let a minimum safety distance of 20 cm between each side of the heater
and any obstacle.

3. HOW TO USE

------ ON/OFF switch
------ Power setting switch: set the power in manual mode, Heating I
(1000W) / Heating II (2000W) / SWING / STAND BY/ --: Continuous
heating(automatically stop heating in 12 hours)
------ On / Stand by
------ Mode(Hot air:1000W/2000W max.)/--: CONTINUOUS HEATING
(automaticlly stop heating in 12 hours)
------ Timer(From 0h to 8h)
------ Automatic oscillation louvers
------ Reset
------ Temperature + or -
EN
39