Southern Enterprises FA532300TX Asamblea página 11

11
800.633 .5096 |
Operating Instructions:
Control Panel on the Front of Unit
1. On/Off Main Power Button
a. Press to switch the unit ON/OFF.
b. The unit will turn on to its default factory settings.
2. On/Off Heater Button: Main display will show your room's temperature when the unit is turned on and when
making any adjustments to heater, flame, log, or timer
a. Automatic Mode: Press the heater button (2) to adjust the temperature rating from 62°F-82°F (17°C-27°C).
Every adjustment changes the temperature by 1°F (1°C). The heater will turn on when the temperature is
set higher than the room's temperature and will automatically turn off when the room has reached the
desired temperature.
b. Manual Mode: Press the heater button (2) until the unit displays "ON". The heater will only turn off by
pressing the heater button one more time, then display will go blank.
c. To change from Fahrenheit to Celsius: Hold the heater button for approximately 5 seconds, the temperature
readout will switch directly from °F to °C and vice versa
d. Note: Due to the unit's infrared feature, the blower will continue to run for approximately 3 minutes
to cool the internal components after the heater function is turned off. This may result in the blower
running for approximately 3 minutes even after the unit has been completely turned off.
3. Adjustable Flame Brightness
a. This button adjusts the flame brightness levels: F5 – F4 – F3 –F2 – F1 – F0 (F5 being the brightest and F0
off)
4. Adjustable Log Brightness
a. This button adjusts the log brightness levels: L5 - L4 - L3 - L2 - L1 – L0 (L5 being the brightest and L0 off)
b. Note: The log will "glow" even when set to F0 due to the flame's light if the flame light is on. Switch
flame lights to F0 to only leave log lights on. To shut all lights off, make sure heater settings are off
and switch flames and logs to F0.
5. Adjustable Timer
a. This allows you to control the duration of the heater function. Press the heater button until display reads
"ON", then, press the timer button until you have reached the desired duration time.
b. Levels: 30 min- 40min- 50min- 1H- 2H- 3H- 4H- 5H- 6H- 7H- 8H- 9H- OFF
se ifu r nitu re store. com
:
1. Power 2. Heater 3. Flame 4. Log 5. Timer