Thank You; Check For Phone Compatibility; Charge The Batteries; Switching On The Jabra Sp500 - Jabra SP500 Manual De Usuario

Thank you

Thank you for purchasing a Jabra SP500, the most versatile Bluetooth
speakerphone on the market. Jabra has become the market leader in hands-
free communication products through the innovation and performance of our
products. The Jabra SP500 is designed to perform superbly in any location – in
the car, the home or the office.
!
Drive safely
Several studies have shown that cell phone usage while driving creates a
distraction to the driver which may increase the likelihood of an accident.
This distraction potential is not eliminated by the use of a hands-free phone.
Hands-free phones have not been shown to be safer than hand-held phones
with respect to driver distraction. When using the phone while driving,
keep conversations short and resist any temptation to make notes or read
documents. Before answering calls consider your circumstances. Pull off the
road and park before making or answering calls when driving conditions
require (e.g. bad weather, high traffic density, presence of children in the car,
difficult junctions or maneuvers.)
Remember, driving comes first, not the call!
Abide by local laws.
Please check if the local laws where you live restrict the use of mobile phones
while driving. It is the owner's responsibility to use this product in compliance
with the laws of the place where you live.
Jabra SP500 Overview
1 Multi-function Button
2 Indicator Light (Blue/Yellow/Red)
3 Volume Control
4 Mute Button
5 Microphone Boom
6 Pairing Button
7 Charging Socket
8 Speaker
2
BEFORE USING YOUR SPEAKERPHONE
1

Check for phone compatibility

The Jabra SP500 is compatible with most Bluetooth¹ (see Glossary) mobile phones.
You can check whether your phone has Bluetooth capability by visiting your phone
manufacturer' s web site or Jabra' s web site (http://www.Jabra.com/JabraCMS/NA/
EN/MainMenu/Products/ProductFinder.htm) which has complete information on
compatibility.
2

Charge the batteries

The Jabra SP500 comes complete with two 1.2-volt (AA 2000 mAh)
rechargeable batteries that must be fully charged before you use the
speakerphone for the first time.
1. Important: Remove the battery's protective plastic sheet to activate the
batteries. (See fig. 1. 1 )
2. Plug the adapter jack into the speakerphone and the AC adapter or the
vehicle power charger into a power socket. (See fig. 1. 1 )
3. The red light will turn on when charging begins. After approximately two
hours, the red light will go out indicating that the Jabra SP500 is fully
charged.
4. Unplug the AC adapter or the vehicle power charger from the
speakerphone.
5. You are now ready to "pair" the Jabra SP500 with your mobile phone. (See
section 4)
6. Low power status is indicated by the yellow LED light flashing. Recharge
the SP500 with the AC adapter or vehicle power charger.
WARNING: Using another AC adapter other than the one provided may
damage or destroy the speakerphone. We recommend that you use the
rechargeable batteries supplied but you can use other brands. You cannot
use non-rechargeable batteries in your Jabra SP500.
3

Switching on the Jabra SP500

Switch on the Jabra SP500
1. Press and hold the multifunction button
melody and the blue LED light flashes three times. When the speakerphone
is in standby mode, the blue LED light flashes every three seconds.
Please note that the blue light will automatically switch off after one minute in order to
save power and to not distract when driving at night. The light will be re-activated upon
any key press.
until you hear the start up
3