Customer Service - Klein Tools Probe-Pro VDV500-123 Manual De Instrucciones

ENGLISH
USING THE PROBE'S WORKLIGHT
The Probe-Pro has a worklight
work areas. Press the Worklight On/Off button
BATTERY REPLACEMENT
When the Battery Status Indicator
1. Turn off instrument(s) before attempting to replace batteries.
2. Loosen screw
3. Remove and properly dispose of four 1.5V AAA batteries.
4. Install new batteries (note proper polarity).
5. Replace battery cover and fasten securely with screw.
To avoid risk of electric shock, do not operate while battery door
is removed.
PROBE-PRO TIP REPLACEMENT (KLEIN CAT. NO. VDV999-068)
The tip of the Probe-Pro is replaceable if damaged. To remove and
P1
replace tip:
1. Turn tip 1/4 turn and pull gently to remove.
2. Insert new tip with key in proper orientation and push gently.
3. Rotate 1/4 turn to lock into place.
Be sure instrument is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents.
Remove the batteries when instrument is not in use for a prolonged
period of time. Do not expose to high temperatures or humidity. After a
period of storage in extreme conditions exceeding the limits mentioned in
the GENERAL SPECIFICATIONS section, allow the equipment to return to
normal operating conditions before using.
Do not place equipment and its accessories in the trash. Items must
be properly disposed of in accordance with local regulations. Please
see www.epa.gov or www.erecycle.org for additional information.
6
OPERATING INSTRUCTIONS
P2
MAINTENANCE
on battery cover
P16
CLEANING
STORAGE
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE

CUSTOMER SERVICE

KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-775-5346
customerservice@kleintools.com
www.kleintools.com
to aid in illuminating dark or low-light
P3
blinks, the batteries must be replaced.
P8
.
P15
to turn the light on and off.