Features; Assembly - Power Stroke PSL1HG01 Manual Del Operador

PRoDuCT sPECIFICATIoNs
Heat Output ........................................................................................................................................................ 200˚F-1050˚F
Input .................................................................................................................................... 120 V, AC only, 60 Hz., 11 Amps
Net Weight ....................................................................................................................................................................1.9 lbs.
KNoW YouR HEAT GuN
See Figure 1, page 12
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
LED TEmPERATuRE DIsPLAY
LED lights located on top of the heat gun display the desired
temperature as indicated by the position of the temperature
adjustment dial.
NosE CoNE
The nose cone on your heat gun can be removed for work
in confined spaces.
uNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-877-617-3501 for assistance.
PACKING LIsT
Heat Gun
Scraper Nozzle
Concentrator Nozzle
Operator's Manual

FEATuREs

oN/oFF sWITCH
Your heat gun has a conveniently located on/off slide
switch.
suPPoRT sTAND
Your heat gun has a built-in support stand for ease of use
and convenient cool down.
TEmPERATuRE ADjusTmENT DIAL
The temperature of your heat gun can be adjusted from
200ºF to 1050ºF by rotating the temperature adjustment dial.

AssEmBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
Page 7 — English