Canon LBP112 Manual De Funcionamiento Rápido página 8

Quick Setup
En
Configuring the Machine
Installing the Driver and
Software
Before the Installation
• The machine does not come with a USB
cable.
Please have one ready, if necessary.
• Make sure that the USB cable
you use has the following
mark.
• Do not connect the USB cable before
installing the driver. If you did, disconnect
the USB cable from the computer, close
the dialog box, and then perform the
following procedure from step 1.
• The procedure described here is only
applicable when your computer runs on
the Windows OS. For more details on the
software installation procedure, see the
driver's manual.
• For the installation when your computer
runs on the macOS, see the driver's
manual.
• Your machine may not come with the
driver for the macOS, depending on the
time of purchase. New drivers are
uploaded to the Canon website, and you
can download and use the latest one.
1.
8 8
Configure the settings in the following order.
2.
If the screen is not displayed properly,
re-insert the CD-ROM/DVD-ROM or search
for "D:\MInst.exe" on the Windows platform
(This description assumes that "D:" is the
CD-ROM/DVD-ROM drive name).
• When the screen to connect the USB cable to
the machine is displayed, remove the tape that
covers the USB port.
Now you are finished with the
configuration of the machine.