Duty Ratio - Facom 711B Manual De Instrucciones

DC Current (Clamp head converter)
Measuring
range
400A
1500A
- Input impedance: 10MΩ.
- Input signal: 30A (720.P30).

Duty Ratio

Measuring
range
10%~90%
Through grade HZ/DUTY:
- Frequency response:40~3KHz.
- The input voltage range: ≥2V AC RMS (input voltage will
increase when the frequency to be measured increases).
- Maximum input voltage: 600V AC RMS.
Maintenance
This section provides basic maintenance information,
including instructions for the battery. Do not try to repair
the meter unless you are an experienced maintenance
person with the relevant calibration, performance testing
and maintenance data.
32
NU-711B_0618 7 langues.indd 32
Resolution
3A 1A/100mV
30A 1A/100mV
1A/0.1mV
1A/0.1mV
400A/1500A (720.P1500).
Resolution
1%
Accuracy
±(2.5% of reading+8 digits)
±(3.0% of reading+10 digits)
Accuracy
±2%
22/06/2018 09:20:54