User Instructions - EASYHOME DF-009A Manual Del Usuario

User instructions

Installing the brushes
1. Before installing the brush head or the fabric brush head, make sure the steam
iron & garment steamer is not plugged in and that steam is no longer coming out.
2. Select which brush will be used and press the brush head onto the head of the
steam iron & garment steamer and push to lock into place. See Fig. 1
3. Before removing either brush, make sure steam iron & garment steamer is not
plugged in, the brush is cooled, and that steam is no longer coming out.
4. Press in the release button located under the unit and lift the brush head upwards
on both sides to remove. See Fig. 2 and 3
Fig. 1
Filling the water tank
1. Before filling the tank, make sure the steam iron & garment steamer is not
plugged in.
2. Fill the water cup with water to desired amount, maximum 4oz (120ml).
3. Open the water tank cover and pour the water into the water tank. Do not over
fill. See Fig. 4 and 5
Note: The water used should be room temperature potable water. Purified water
is recommended. Do not use hot water or any solutions such as detergent.
Fig. 4
4. Before refilling the water tank, press the steam trigger button and make sure all
the water in the tank has been used. Make sure steam iron & garment steamer is
unplugged and cooled down before refilling.
Fig. 2
Fig. 5
User instructions
Fig. 3
9