Cleaning - JVC GZ-HM200 Manual De Instrucciones

Indication
RECORDING FAILURE
PLAYBACK FAILED
USE AC ADAPTOR
POWER IS OFF, OR USB
DEVICE IS UNSUPPORTED
DVD-RW DISC HAS BEEN
ALREADY USED
FINALIZATION FAILED
NO FILES
VIDEO MANAGEMENT FILE
IS DAMAGED, RECOVERY IS
REQUIRED TO RECORD/
PLAYBACK, RECOVER?
NO EVENT REGISTERED
SCENES
CANNOT DETECT FACE

Cleaning

Before cleaning, turn off the camcorder and remove the battery pack and AC adapter.
To clean the camcorder

Wipe the camcorder gently with a soft cloth. If the camcorder is particularly dirty, dip the cloth
into diluted mild soap and wring it out well. After wiping with the wet cloth, wipe again with a
dry cloth.
To clean the LCD monitor

Wipe the monitor gently with a soft cloth. Be careful not to damage the monitor.
To clean the lens

Wipe gently with lens cleaning paper.
NOTE
•
Avoid using strong cleaning agents such as benzine or alcohol.
•
Mold may form if the lens is left dirty.
•
When using a cleaner or chemically treated cloth, refer to the cautions for each product.
•
Remove and re-insert the SD card. (MultiMediaCard cannot
be used.)
•
Remove any dirt from the SD card terminals.
•
Insert the SD card before switching the power on.
•
Use the AC Adapter as power supply.
•
Turn on the power of the connected USB device.
•
Connect the AC adapter to the BD/DVD burner.
•
Replace the disc of the BD/DVD burner with another disc.
•
Replace the disc of the BD/DVD burner with another disc.
•
Slide the mode switch to select the desired mode (
•
Select [OK] to restore.
•
Register events to the files before you start recording.
•
Turn the face detection mode on before you perform recording
or snapshot.
Action
! #
or ).