Wireless Network Setup - Signamax 065-1750 Guía Rápida De Instalación

PDF format.)

Wireless Network Setup

1. Peer-to-Peer: Connects with other wireless client(s). This does not
require Access Point. Please make sure the "Network Name" (SSID or
ESSID) and "Peer-to-Peer" channel are the same for all clients in the
same wireless network. Double click on the Configuration Utility icon to
open the utility.
- Click on "Profile Setting" tab and "Add" to create a new profile.
- Enter a name that the profile correspond, click "Next".
- Select the "Network Type", click on the drop-down arrow and select
"Peer-to-Peer", and then at "Peer-to-Peer Channel", use the up/down
arrows to select the channel number, and then click "Next".
- Select the Authentication Mode to enable the "Encryption" if you have
any security concern. Once you enable the encryption function, then
you should input the corresponding key. Click "Next".
- On IP Setting select "Enable" or "Disable" to make used of it. Click
"Complete" to finish the configuration.
6