Unpacking; Product Identification; Assembly - Desa PG35VPA Manual Del Propietário

SAFETY INFORMATION
Continued
CAUTION: The gas pressure
regulator provided with this ap-
pliance must be used. This regu-
lator is set for an output pressure
of 49.8" W.C. (1.8 P.S.I.).
24. Use correct pressure specifications, see page 6.
25. Propane/LP gas cylinder is not provided.
Use a 20 lb. propane/LP gas cylinder marked
propane. The cylinder supply system must be
arranged for vapor withdrawal. The cylinder
used must include a collar to protect the cylin-
der valve. The cylinder must be provided with
a shutoff valve terminating in a propane/LP
gas supply cylinder valve outlet specified,
as applicable, for connection no. 510 in the
Standard for Compressed Gas Cylinders Valve
Outlet and Inlet Connections, ANSI/CGA-V-
1, or connection no. 600 in the Compressed
Gas Associationʼs Limited Standard Cylinder
Valve Outlet Connection for Propane Small
Valve Series or combination propane/LP gas
cylinder valve and quick-disconnect assembly
complying with 1.16.5-c and a safety relief
device having a direct communication with
the vapor space of the cylinder.

UNPACKING

1. Remove all packing items applied to heater
for shipment.
2. Remove all items from carton.
3. Check all items for shipping damage. If heater
is damaged, promptly inform dealer where you
bought heater.
4
Figure 2 - Outdoor Patio Heater
Tools required:
• #2 Phillips screwdriver
• 9/16" Open end wrench
1. Remove back panel.
2. Attach hose.
3. Check for leaks. See Checking for Leaks, page 5.
4. Replace back panel.
www.desatech.com
PRODUCT
IDENTIFICATION

ASSEMBLY

Control
Knob
113530-01B