Cleaning And Maintenance - Easy Home TNP-2008I-E3 Manual Del Usuario

Cleaning and Maintenance

CAUTION:
Always be sure that the portable fireplace heater is switched to OFF (O) and
unplugged before cleaning or attempting to store the fan.
1. Before cleaning, turn the heater off and unplug from the electrical outlet.
2. Wipe off excess dust with a lint free cloth.
3. A vacuum cleaner brush attachment can be used to clean the fan guard. This
will help remove lint and dirt from inside the fan. NOTE: A can of compressed
air may also be used to help push any excess dirt out.
4. Should the heater housing become soiled, it can be cleaned with a damp cloth
using warm (not hot) soapy water and a mild detergent solution. Wipe dry.
5. Do not immerse your heater in water or any other liquids. Do not allow any
liquid to get into the fan or motor.
6. Do not use gasoline, thinner or benzene as a cleaner.
Please Note:
Take care not to stain the plastic parts with oil. Avoid using the fan in places
where oil is liable to spill on fan. Damage or deterioration can be caused by oil on
the housing.
DO NOT USE ANY ABRASIVE MATERIAL TO CLEAN THE SURFACE!
DO NOT IMMERSE THE HEATER INTO WATER OR ANY OTHER LIQUID!
Cleaning and maintenance
9