Freestanding Installation - Klarstein 10032867 Manual Del Usuario

EN
14

FREESTANDING INSTALLATION

The heater must always be used with the feet assembled and in upright position Attach
the feet to the heater in the orde r given in Figure below.
• Make sure the heater is switched off and unplugged
• Turn the heater upside down(Switch cont rols nearer to floor)
• Locate the feet in position, making sure the holes in the feet align with the fixing
holes on the heater body.
• Secure the feet using the screws provided.
Screws
2 Heizseinstellungen
600 W, 900 W, 1500 W
beleuchtete Tasten