Easy Home VC9389 Manual Del Usuario página 14

Using the carpet cleaner
NOTICE!
Risk of damage!
Using the carpet cleaner without the water solution tank in place
or with a wrong solution may damage the carpet cleaner.
− Always make sure that the water solution tank is properly
in place before using the carpet cleaner.
− Do not use any solvents, cleaners with strong acidic or
strong alkali formulas, or any type of cleaning solution not
specifically for use in carpet cleaning machines.
• Only use suitable (low-foaming) carpet cleaning solution. Us-
• To reduce the risk of fire, do not use flammable or combusti-
1. Unplug the carpet cleaner.
2. While holding on to the water solution tank
handle 9 upwards.
3. Tilt the water solution tank away from the carpet cleaner and
remove it.
4. Unscrew the water solution tank cap
counterclockwise.
5. Add cleaning solution, making sure to follow the instructions
on the bottle.
6. Fill the remainder of the water solution tank with warm tap
water (max. 104 °F (40 °C)) and replace the water solution
tank cap.
7. Place the water solution tank back into position by pushing it
down and into the carpet cleaner.
8. Push the water solution tank handle down until it clicks, locking into place.
14
ing incorrect solutions may cause excess foaming, which will
prevent the carpet cleaner from working effectively.
ble liquid to clean a floor.
4 , lift the water solution tank
3 by turning it