N-Com MCS II Seguridad E Instrucciones página 12

Use of the extension cable (optional)
In case of need, it is possible to use the Extension Cable included in the package to
make the connection via cable to the motorcycle easier, moving forward the micro USB
connector on the left side of the helmet.
12
Fig. 6
Fig. 7
Remove the

apply the plastic clip on the helmet
shell gasket,
Position the clip as shown in Fig. 6.
Note: It takes up to 24 hours for the
adhesive to stick completely. During this
time, do not expose the helmet to
atmospheric agents.
Connect the Extension Cable to the

micro USB connector of the helmet.
Fix the Extension Cable inside the
clip. Connect the Extension Cable to
the motorcycle connection cable.
protective film
on the left side.
and