Charging Programs - auto XS EA-2138 Manual Del Usuario

Operation
The power indicator
es in green, the display
blinking.
The power indicator
manently illuminated in green.
The error indicator
up in red.
Standby mode
Voltage indicator
a value.
The voltage indicator
shows ѡrr .
The voltage indicator
blinks.

Charging programs

The charger has four charging programs.
• Motorcycle charging program
capacity of 1.2 Ah to 120 Ah. The battery is charged with a limited charging
current of 0.8 A.
• Car charging program
rated capacity of 1.2 Ah to 120 Ah. The battery is charged with an elevated
charging current of 3.8 A.
• Cold charging program
with a rated capacity of 1.2 Ah to 120 Ah at low temperatures below 32 °F
(0 °C). The battery is charged with an elevated charging voltage and a high
charging current of 3.8 A.
• 6 V charging program
a rated capacity of 1.2 Ah to 14 Ah. The adapted charging current amounts to
0.8 A.
14
12 flash-
1 is
12 is per-
lights
13
14 is shown.
15 displays
15
15
: Designed for normal 12 V car batteries with a
8
9 : Suitable for charging normal 12 V car batteries
: Special program for charging 6 V batteries with
10
The charger is connected to the power
grid. The battery terminal clamps
5 are not connected or are not correctly
connected.
The charger is connected to the power grid.
The battery terminal clamps
are connected.
The battery terminal clamps
are incorrectly connected (reverse polarity).
There has been a short circuit. The charger
will switch to standby mode
The charger is overheated. It switches to
standby mode.
The charger is in standby mode.
The voltage indicator displays the current
voltage for the connected battery.
The battery is not suitable or defective.
The battery is reactivated with an impulse
charge.
7 : Suitable for 12 V batteries with a rated
4 and
4 and 5
and
4 5
14 .