Tape Counter And Memory Stop; Timer Recording/Playback - Denon DRW-695 Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40

TAPE COUNTER AND MEMORY STOP

dB
-40 -30 -20 -10
L
R
RESET
COUNTER
MEMO
MPX
MEMORY
PLAY
DIRECTION
1) Operation of the Tape Counter
(1) Press the RESET button to reset the counter to " ‚‚‚‚ ".
(2) By using the PLAY, FF, or REW functions, the reading of the counter will
change to indicate index position.
During recording and playback operations, the counter is useful for
noting the location of existing programs or positions where recording is
to be started.
The reading of this counter does not correspond with that of any other
deck.
(3) Deck A and Deck B have the memory of their own counter.

TIMER RECORDING/PLAYBACK

Timer recording/playback can be made using any audio timer available on the market.
DRW-695
LINE
OUT IN
L
L
L
R
R
R
L NE
L NE
OUT
N
Wall outlet
On timer recording/playback
Timer recording procedure
1. Make sure the connections are correct, especially the power supply
connections.
2. Turn "on" the power switch of each appliance.
3. Tune the desired station on the tuner.
4. Load the tape for recording. (Make sure the erase prevention tab is not
broken off; if it is, cover the hole with plastic tape).
5. Set the Dolby NR switch to the appropriate position.
6. Select the type of tape transport with the REVERSE MODE switch
7. Make sure the monitor switch to the SOURCE position.
8. Adjust the recording input level.
9. Set the starting position of the tape.
10. Set the timer switch (TIMER) to the "REC" side.
11. Set the audio timer to the desired time. The audio timer will turn the power
supply on at the desired time.
* With the above procedures, timer controlled recording can be made.
When the preset time comes, the power is supplied and the FM
broadcast can be recorded.
• Timer playback procedure
1. Make sure the connections are correct, especially the power supply
connections.
-5
-3
-1
0
+1
+3 +5 +10
HIGH
DUB
SYNC
MEMO
PLAY
DIRECTION
Amplifier
L
R
SYNCHRO
Timer
u
REC OFF PLAY
TIMER
2) MEMORY STOP Operation
(1) During recording or playback, the Memory Stop feature can be used to
locate a particular point on the tape. Press the COUNTER RESET button
at the desired point.
RESET
(2) Then Press the COUNTER MEMORY button, the MEMO indicator
COUNTER
lights.
MEMORY
(3) When the Fast Rewind (
REC PAUSE
travel (
), or the Fast Forward (
reverse tape travel (
until the counter indication of " ‚‚‚‚ " is reached.
REC/REC MUTE
The Memory Stop feature will rewind or forward the tape to within –5
CD SYNCHRO
counts in the forward (
and to within +5 counts in the reverse (
to " ‚‚‚fi"). After this, several seconds are required for corrective
operations.
The Memory Stop function operates independently in both directions
for deck A and deck B.
Caution:
If the memory stop operation is performed after repeated fast-forwarding or
rewinding, the tape may not stop at the proper position.
R
L
TUNER
PB REC
L
L
A
L
L
SP
R
R
B
R
R
TAPE 1
Lch
Speaker System
2. Turn "on" the power switch of each appliance.
3. Load the pre-recorded tape to be played back.
4. Set the Dolby NR switches to the appropriate positions.
5. Select the type of tape transport with the REVERSE MODE switch
6. Set the monitor switch of the Amplifier to the TAPE position.
7. Press the PLAY (
level.
2
Press the stop (
.
8. Set the timer switch (TIMER) to the "PLAY" side.
9. Set the audio timer to the desired time. The audio timer will turn the power
supply on at the desired time.
* With the above procedures, timer playback can be accomplished.
When the preset time comes, the power is supplied and playback will
start.
Notes:
• Please read the operating instructions for the timer before use.
• If the timer recording or playback is not desired, be sure to switch the timer
switch (TIMER) to "OFF".
• When using timers that allow several "on/off" operations, timer start
functioning can continue an unlimited number of times until the tape in the
machine is finished.
6
) button is pressed during forward tape
7
) button is pressed during
), the tape is rapidly rewound (or advanced)
) direction (from " ‚‚‚‚ " to "
) direction (from " ‚‚‚‚ "
Tuner
L
R
Rch
1
) button and playback the tape; adjust the playback
) button.
ENGLISH
")
OUT PUT
u
.
REC OFF PLAY
TIMER
11

Publicidad

Tabla de contenido
loading

Tabla de contenido