Pair Multiple Headsets; Reset Headsets; Switch The Adapter Off - Nokia AD-5B Guia Del Usuario

All audios, including the call alert tones, are routed to the headset.
6. If the pairing is unsuccessful, press the control key once briefly; or detach the
adapter from your phone, and start the pairing procedure again from step 1.

Pair multiple headsets

To pair another headset to the adapter, repeat the procedure "Pair the device," page
10. However, first make sure that the headset that has already been paired is
turned off, and that only the new unpaired headset is within a 32 feet (10 meter)
range of the adapter. The adapter can be paired with two headsets simultaneously.
When using the headsets, the adapter tries to find the default user, which is the
first paired headset, then the secondary headset. If you want to pair more headsets,
the new headset replaces the secondary user. You can replace the secondary user as
many times as you want. If you want to replace the default user, you must reset the
adapter. Since the reset clears the memory of the adapter, the secondary user is
reset as well.

■ Reset headsets

Reset clears all pairing and user data information. To reset the adapter, press and
hold the control key for 10 seconds. The reset is confirmed with an alternating red
and green blink for another 10 seconds.
Your headset may accept only a limited number of pairings and may need to be
reset to make the pairings. See "Reset the headset," page 24.

■ Switch the adapter off

To switch the adapter off, press the control key for 2 seconds. The adapter blinks
red once, and disappears from the phone display. When the adapter is turned
T h e A D - 5 B w i r e l e s s a u d i o a d a p t e r
11