Scale Removal - Honeywell HCM-800 Serie Manual Del Usuario

CLEANING
Cleaning involves two steps, SCALE REMOVAL and DISINFECTING. Be sure to perform these in the proper order to
avoid harmful chemical interactions.

SCALE REMOVAL

Step 1
Turn off and unplug your
humidifier.
Step 5
Let stand for 20 minutes
DISINFECTING
Step 1
Remove the motor housing and filter and carefully set aside.
Failure to do so will damage the filter.

HCM-800_OM.indd 6
NOTE: REMOVE FILTER BEFORE CLEANING.
Failure to remove filter during cleaning will destroy the filter.
Step 2
Remove the water tank and
housing and carefully set the
motor housing aside.
Step 6
With vinegar in the tank and
base, wipe surface with a soft
cloth or brush.
Step 2
Step 3
Place base and water tank
in sink or tub and fill with
undiluted vinegar.
Step 7
Rinse the base and water
tank thoroughly with water
to remove scale and cleaning
solution.
Step 3
Fill water tank with 1 tsp. of
household bleach and 1 gallon
of cool water.
Step 4
Place motor housing on base
and let sit.
NOTE: Do not turn on.
Step 8
Fill base with clean, cool tap
water. Replace motor housing
back on base and let sit 20
minutes.
With a soft cloth, clean the
screen located under the main
housing to remove mineral
deposits.
4/5/07 12:06:46 PM