Batteries Installation - ITS EKSELANS RCT 2 Manual Del Usuario

EN
LEARNING FUNCTION BUTTONS:
•The remote control has 4 programmable buttons for controlling the TV: TV Power, Vol
+, Vol-, TV/AV.
•Long press the SET button for 3 seconds, the red LED will be from low light to brighter
light,release the SET button.
•Place the learning and the original remote control from the TV opposite to each other
at a distance of 3-5 cm.
•Press and release the learning remote control button you want to program,the red LED
will light blinking.
•Press the button of the original remote control, the LED should blink 2 times and light
constantly, release the button.
•When learning is completed, press the SET button, the LED
will turn off.

BATTERIES INSTALLATION

1. Open the battery compartment cover.
2. Insert 2x AAA batteries with correct pola-
rization.3. Close the battery compartment
cover.
Notes:
Do not mix the batteries.
Remove the batteries if the remote control is
not going to be used for an extended period
of time.
Do not place the remote control under the
direct sunlight or near sources of excessive heat.
Point the remote control to the receiver, no more than 8 meters from the remote
control. Sensor.