Dyna-Glo DG951ELA-D Manual De Instrucciones página 7

ASSEMBLY INSTRUCTIONS
CAUTION: This unit is heavy. Do not
attempt to lift without assistance.
3A. With the assistance of a second person turn
the smoker on its back. To avoid damage
to the smoker, use a flat, soft surface like a
carpet, blanket or cardboard box.
Remove two of the M6x12 bolts from the
front legs as shown in figure 3A.
3B. Remove four of the M6x12 bolts from the
front legs. Then remove eight of the M5x12
bolts from the rear casters as shown in
figure 3B.
Please retain the disassembled rear
casters and all bolts for the next series
of steps.
Store the front legs, for future use, if
desired.
3C. Reinstall two of the disassembled M6x12
bolts to the smoker as shown in figure 3C.
3A
Front legs
3B
M5 x 12 bolt
3C
7
M6 x 12 bolt
M6 x 12 bolt
Rear Caster
Rear Caster
M6 x 12 bolt