Publicidad
Idiomas disponibles
Idiomas disponibles
10
Preassembly
- Position fog light
on left retaining bracket
bracket
(all included).
- Mount screws
with washers
- Mount switch
in switch housing
- Mount nut
for the switch (included) and tighten.
Assembly
- Drill a mounting hole (Ø 22 mm) on both sides of the inside cover,
as shown, using appropriate tools.
When drilling, make sure that none of the components are
damaged!
- Position cable grommets
holes.
- Position retaining bracket with fog lights, left
- Mount short bushings
(included).
- Mount screws
with long bushings
3.5 Nm.
and right retaining
and tighten.
(all included).
(included with wiring harness) in the
and right
(all included) and tighten to
.
Publicidad
