KTM Power Parts 60714910133 Manual De Usuario página 11

- Route fog light cables on both sides through the cable grommets.
Route the wiring harness
- Remove screws with bearing sleeve and rubber bushing.
- Disconnect connector .
- Pull off vent hose .
- Remove the cable tie(s).
- Pull off vent hose .
- Remove screws with bushings.
- Raise the fuel tank and pull to the rear.
- Remove screws .
- Mount retaining bracket
- Route wiring harness (included) without tension toward the head-
light as shown.
- Mount relay (included with wiring harness) on the retaining
bracket .
- Join plug-in connector together.
(included) with screws and tighten.
11