Publicidad
Idiomas disponibles
Idiomas disponibles
F
F
Your new Acoustasonic™ Junior amplifier delivers Fender
tone that today's musicians demand and the rock solid
quality that sound engineers have depended on for more
than 50 years.
Here 's a preview of some of the
Acoustasonic Junior's features:
• 40 watts of power per channel @ 8Ω (80 Watts R.M.S.
To t a l )
• Classic Fender reverb and chorus for a full-bodied tone.
• Two 8" woofers and a piezo horn for clean, powerful
response.
• Two independent channels with individual tone con-
trols, voiced for acoustic instruments and vocals.
A. INSTRUMENT - Plug your guitar in here.
B. VOLUME - Adjusts the overall loudness of the instru-
ment channel.
C. TREBLE - Adjusts the high-frequency level of the
instrument channel.
D. MID - Adjusts the middle-frequency level of the instru-
ment channel .
E. BASS - Adjusts the low-frequency level of the instru-
ment channel .
F. FEEDBACK NOTCH - By S L O W LY rotating this knob you
can fine and suppress feedback at a specific fre q u e n c y.
G. REVERB - Activates the reverb effect on the instrument
channel.
H. STRING DYNAMICS - Controls a dynamic tone shap-
ing filter on the instrument channel. Rotating the knob
clockwise reduces high-frequency "harshness" when
playing at high volumes while maintaining "crispness"
when playing at lower levels.
I. MIC - Plug your microphone in here. This three-pin
XLR, balanced, female input connector is intended for
input signals from low-impedance microphones.
J. LINE/INST - This 1/4-inch TRS (Tip/Ring/Sleeve) input
jack is suited for line-level equipment such as high-
impedance microphones, keyboards and dru m
machines. It accepts both balanced and unbalanced
inputs.
K. VOLUME - Adjusts the overall loudness of the mic / line
channel.
L. PHASE - Reverses the phase of the mic / line channel
useful for eliminating feedback in instruments using
dual-pickup configurations.
M. TREBLE - Adjusts the high-frequency level of the mic /
line channel .
N. BASS - Adjusts the low-frequency level of the mic / line
channel.
e
n
d
e
r
®
A
c
o
e
n
d
e
r
®
A
c
o
F
r
o
n
t
P
a
F
r
o
n
t
P
a
u
s
t
a
s
o
n
i
c
™
u
s
t
a
s
o
n
i
c
™
• A footswitch jack for connecting the optional
footswitch which offers remote switching of the chorus
effect.
• Exclusive "String Dynamics" control effective at sup-
pressing high frequency "harshness" in the amplifica-
tion of some acoustical instruments.
• 1/4-inch TRS and 3-Pin XLR female input connectors
• On-board spring reverb and analog chorus effects.
• E ffects loop jacks for connection to to either stereo or
monophonic external effects devices .
n
e
l
F
u
n
c
t
i
o
n
e
l
F
u
n
c
t
i
o
O. CHORUS - Activates the chorus effect on the mic / line
channel.
P. REVERB SEND - Adjusts the level of the mic / line
channel that is sent to the reverb circuit. Rotating the
knob clockwise increases the level.
Q. RATE - Adjusts the modulation speed of the chorus
effect.
Rotating the knob clockwise increases the
modulation speed.
R. MASTER CHORUS - Activates the chorus effect on
both channels. The master chorus must be on before
any chorus signal will be heard.
footswitch, while connected, will override the master
chorus select switch.
S. DEPTH - Adjusts the depth (swell) of the chorus effect.
Rotating the knob clockwise, increases the intensity.
T. CHORUS INDICATOR - This LED illuminates when the
chorus circuit is active. The LED brightness varies
indicating the chorus sweep rate.
U. MASTER REVERB - Adjusts the amount of overall
reverb effect in both channels. Must be turned up
before any reverb effect will be heard.
V. MASTER PHASE - Reverses the phase of the
Acoustasonic Junior amplifier. Useful for eliminating
feedback when playing in small environments.
W. POWER INDICATOR - This LED illuminates when the
Acoustasonic Junior is receiving power.
X. POWER SWITCH - Turns the AC power ON and OFF.
When the switch is OFF, the amplifier is completely
shut down.
4
J
u
n
i
o
r
J
u
n
i
o
r
n
s
n
s
The optional
Publicidad
