High Pressure Operation - Promaker PRO-H1800 Manual Del Usuario

pressure pump. If the appliance does not build up pressure within 2
minutes, switch the appliance off and proceed in accordance with the
instructions in Chapter "Troubleshooting".

High pressure operation

CAUTION
Keep a distance of at least 30 cm when using the jet for cleaning
painted surfaces to avoid damage.
CAUTION
Make sure the on/off switch is set to "OFF/O" and insert the plug into a
properly installed socket.
ATTENTION
• The washer must be used on a secure and stable surface in a
standing, upright position.
Connect the product to power and water supply as described.
• Open the water supply
• Hold the spray gun with both hands.
• Direct the nozzle of the chosen accessory away from you towards
the surface to be cleaned.
• Unlock the trigger and press it until a constant amount of water
flows through the nozzle, to allow air trapped in the hose to
escape.
• Release the trigger.
• Turn on the switch "OFF/ON".
15