Storing the appliance
• Park the machine on an even surface.
• Detach spray lance from the trigger gun.
• Push the disconnect button on the trigger gun and pull the high-
pressure hose out of the trigger gun.
• Place the trigger gun into the storage for the trigger gun.
• Put both spray lances into the storage for the spray lance.
• Dirt grinder spray lance: Nozzle towards the bottom.
• Coil the high-pressure hose and hang it over the hose storage.
• Store the mains connection in the accessory compartment.
• Prior to extended storage periods, as during the winter, also
observe the instructions in the care section.
• Always store the pressure cleaner, parts, and accessories
in a place that is inaccessible to children. The ideal storage
temperature is between 10 °C and 30 °C. Store the power washer
indoors to prevent the water in the unit from expanding under
freezing conditions.
• We recommend using the original package for storage or
covering the product with a suitable cloth or enclosure to protect it
against dust.
Frost protection
ATTENTION
Appliance and accessories that are not completely drained can be
destroyed by frost.
Completely drain appliance and accessories and protect them against
frost. To avoid damage:
• Detach the appliance from the water supply.
• Detach spray lance from the trigger gun.
• Turn on the appliance "ON/OFF".
• Push the lever of the trigger gun until no more water is escaping .
• Release the lever of the trigger gun.
• Lock the lever of the trigger gun.
• Turn off the appliance "ON/OFF".
• Store the appliance and the entire accessories in a frost free
room.
19