TROUBLESHOOTING
PROBLEM
Remote control does
not work.
Remote control
signal is weak and only
works sometimes.
Fan motor continues
to blow after unit is
powered off.
POSSIBLE CAUSE CORRECTIVE ACTION
Weak or failing
batteries.
Pressing the buttons
too quickly.
Using the remote
control too far away
or at an off angle.
Normal operation.
Replace with 2 AAA batteries
(See page 10 for more information.)
Press the buttons slowly and steadily to ensure the
transmitter recognizes the request.
Move closer to the insert; the remote control will only
work within a distance of 20 feet and 45 degrees to
either side from the front of the heater.
This is a standard feature; the blower runs for
additional time to cool off heater tubes.
13