General; Model Identification; Intended Use - Walther PILOT TERRA Instrucciones De Servicio

1

General

1.1

Model Identification

Model:
Type:
Manufacturer:
1.2

Intended use

The manual spray guns PILOT TERRA Gravity-Feed Cup and PILOT TERRA
Material Connection are designed to be used exclusively for sprayable media, such
as:
• paints and lacquers
• greases, oils and corrosion preventives
• ceramic glazes
Aggressive materials must not be sprayed.
If the material you intend to spray is not included in the above list, please contact
WALTHER Spritz- und Lackiersysteme GmbH, Wuppertal, for further information.
Please note that sprayable materials may only be applied to workpieces and /or
similar objects.
The temperature of the spraying material must not exceed 43°C.
The term "normal use" also implies that all safety warnings, operating handling
details, etc., as stated in these operating instructions are carefully read, understood
and duly complied with.
This equipment complies with the explosion protection requirements of Directive
94/9/EC (ATEX) for the explosion group, equipment category and temperature class
indicated on the type plate. When using the equipment, the requirements specified
in these Operating Instructions must be observed at all times.
The technical data indicated on the equipment rating plates and the specifications in
the chapter "Technical Data" must be complied with at all times and must not be
exceeded. An overloading of the equipment must be ruled out.
The equipment may be used in potentially explosive atmospheres only with the
authorisation of the relevant supervisory authority.
The relevant supervisory authority or the operator of the equipment are
responsible for determining the explosion hazard (zone classification).
The operator must check and ensure that all technical data and the marking of the
Manual Spray Gun PILOT TERRA
PILOT TERRA
PILOT TERRA
PILOT TERRA-LVLP
PILOT TERRA-LVLP
WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18-30
D-42327 Wuppertal
Tel.: +202 / 787-0
Fax: +202 / 787-2217
www.walther-pilot.de • Email: info@walther-pilot.de
Gravity-Feed Cup
Material Connection
Gravity-Feed Cup
Material Connection
24
V 11 801
V 11 802
V 11 811
V 11 812