Domus DTA-45 Manual De Uso Y Mantenimiento página 89

7.2. Key associated functions
When the different buttons are pressed, the functions described modify the machine
conditions.
Button Machine status
Select Programme selection
Temperature selection
Humidity selection
While operating.
Temperature selection
While operating.
Humidity selection
In case of alarm
Arrows Programme selection
Temperature selection
Humidity selection
Start/Stop Programme selection
Humidity selection
Temperature selection
Operating
In case of alarm
Prog. (x3) Machine stopped
7.3. Information displayed
The display offers different types of information, including the programme number, the time
remaining, the percentage humidity and the temperature setting. The information may vary
according to the state of the machine at any moment.
When the machine is operating, the % symbol flashes.
When the heating is ON, an arrow pointing upwards appears next to the thermometer.
The following table shows all the possible information displays and the conditions in which
they are displayed.
Display Machine status
MP
END
AL-X
(2) The End / Anti-crease cycle lasts a maximum of 99 minutes. During this period, an alarm
will sound every three minutes, reminding you that the cycle has finished. After 99 minutes
the machine returns to the status: Pause.
88
Display
P01
60º
%20RH
60º
20%RH
AL-X
P01
60º
%X
P01
%20RH
60º
AL-X
In the ignition (2s)
End / Anti-crease
Alarm
Action
Switches to temperature selection
Switches to humidity selection
Switches to programme selection
Switches to humidity selection
Switches to temperature selection
Reset alarm
Increase / Decrease Programme No.
Increase / Decrease temperature
Increase / Decrease humidity
Start the cycle with the last selected parameters
Start the cycle with the last selected parameters
Start the cycle with the last selected parameters
For the selected programme
Reset alarm
Enters programming mode
Comments
Shows software version
End of cycle / anti-crease cycle
Displays one of the alarms, see section 5
(2)