Optional Setting; Channel Add/Delete; Picture Adjustment - Magnavox CD130MW9 Manual Del Usario

O
PTIONAL SETTING

Channel Add/Delete

The channel add/delete function lets you add the channel that was not
added by the auto channel scan due to the reception status at the initial
setting. You can also delete the unnecessary channels.
1
Press [SET-UP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL SETUP", then
press [ENTER].
or
3
Use [Cursor K / L] to select "ADD/DELETE(DTV)" or
"ADD/DELETE", then press [ENTER].
or
4
Select the channel you want to add or delete.
(Refer to "Channel Selection" on page 13.)
5
Press [ENTER] repeatedly to select "ADD" or "DELETE".
• To add or delete another channels, repeat steps 4 to 5.
• Color of channel number displayed at the right top of
the TV screen indicates;
- Blue: The selected channel will be added.
- Red: The selected channel will be deleted.
6
Press [SET-UP] to exit.
Note:
• "ADD/DELETE (DTV)" or "ADD/DELETE (TV)" menu will dis-
appear automatically in about 10 seconds.
• In the digital mode (DTV), you can add or delete channels
only for major channel.
• Once you delete a DTV channel, you cannot recover the
channel without performing auto channel scan again.
(Refer to "Auto Channel Scan" on page 12.)
16
EN
e.g.) digital TV mode
--- TV SETUP ---
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
DTV SETUP
e.g.) digital TV mode
--- CHANNEL SETUP ---
ADD/DELETE (DTV)
AUTO PRESET CH (DTV)
AUTO PRESET CH (TV/DTV)
AUTO PRESET CH (CATV)
! CATV takes approx. 50min.
e.g.) digital TV mode
D25
ADD/DELETE : DTV

Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.
1
Press [PICTURE/SLEEP] repeatedly until the desired
picture menu appears.
2
Within 10 seconds, use [Cursor { / B] to adjust the
quality.
or
[Cursor { ]
BRIGHT to decrease brightness to increase brightness
CONTRAST to decrease contrast
COLOR to decrease color
TINT to add purple
SHARPNESS to make soft
[SLEEP]
[BRIGHT]
[CONTRAST]
[COLOR]
[TINT]
[SHARPNESS]
[Cursor B]
to increase contrast
to brighten color
to add green
to make clear