IndoorCycling Group myride VI-MYVXC-01 Manual De Instrucciones página 7

1: REMOVE THE WAVE STAND FROM THE PACKAGING
The Wave stand is very heavy! It requires at least two people to remove the stand from the
packaging. Make sure you have a firm grip, and avoid holding the edges (which may bend).
2: MOVE THE MYRIDE® VX CONSOLE INTO POSITION
With at least two people, pick the Myride® VX console up and move to its proper location. Use
a firm grip; do not slide or tilt the stand, as the weight of the unit may bend the metal frame. To
prevent the Myride system from tipping over, manufacturer recommends to bolt the unit to the
floor using the holes in the floor plate. Make sure sufficient bolts and anchors are being used.
Once you have finished the installation of the Myride® VX console, plug in the power cable and
turn the power switch to on (|). The Myride system will take a moment to boot up.
3.
EU PLUG
Please use the AC extension cable required for the electrical system in your country. Consult a professional electrician
if you are unsure how to connect the Myride® VX console your in-house electrical circuit.
2.2 STARTUP
3: POWER ON THE MYRIDE® VX CONSOLE
ATTENTION!
UK PLUG
USA PLUG
7