La Crosse WT489 Manual De Instrucciones página 11

TO USE THE SLEEP TIMER
You could use Sleep Timer to control your light, radio, nature sound or music before you go to sleep.
1. Press the SLEEP once, the LCD display shows the SLEEP icon and "120" (120 minutes) and
flashes. Press SLEEP one at a time to select a 120-, 90-, 60-, 45-, 30-, 15-, 10-, 5-minute
sleep timer.
2. The sleep timer display remains for few seconds and then returns to normal time display. The
3. The radio will play for the programmed sleep time and then shut off. To check how many
sleep time is remaining, press SLEEP once.
4. To turn off the radio before the sleep time has elapsed, press and hold MODE for 2 seconds.
Remark: the SLEEP function could also control your white LED light, colored mood Light, nature
sounds or the AUX function in the same way.
TROUBLE SHOOTING
If your unit displays irrelevant time or does not function properly, which maybe caused by
electro-static discharge or other interference, use a thin object to press the RESET button at the
back of your unit. All
the settings will be reset to default settings and you need to set your unit again.
CARE OF YOUR PRODUCT
1. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive
heat or moisture.
2. Protect your furniture when placing your units on a natural wood and lacquered finish by
using a cloth or protective material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents
such as Benzine, thinner or similar materials can damage the surface of the unit. Make sure
the unit is unplugged before cleaning.
4. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadimium) batteries.
icon will appear, showing the timer is activated.
P. 11