Quick Start - La Crosse WT489 Manual De Instrucciones

QUICK START

For best reception of radio signal, keep your clock few feet away from the AC outlet, AC/DC adaptor,
any electronic or mobile devices.
Plug the AC/DC adaptor to any household AC outlet, and then plug the DC jack to the back of your
unit. The LCD shows the default time 0:00 and it is ready to work for you.
Extend the FM wire antenna fully and vary the direction for best FM reception. Do not strip, alter or
attach to other antennas.
BATTERY BACK-UP INSTALLATION
In the event that the AC/DC adaptor power is disconnected or a power failure or other interruptions
occur, the back-up batteries will maintain the time and alarm settings. The light functions do not work
when batteries are only used to power your unit.
1. Remove the battery cover at the back.
2. Insert 3 x AAA batteries (alkaline batteries preferred) by observing the + and - polarity signs
inside the battery compartment.
3. Replace the battery cover, making sure the cover locks into place.
Note: Please note the white LED light, the colored mood light, always-on LCD backlight do not work
while the clock is operating on battery power only.
P. 5