Introduction; Intended Use; Pictured Components; Scope Of Delivery - Parkside PBH 1050 B2 Traducción Del Manual De Instrucciones Original

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
W
Watts (Effective power)
V ~
Volt (AC)
n
Design no-load speed
0
Wear hearing protection!
Wear a dust mask!
Hammer drill PBH 1050 B2
Introduction
Congratulations on your new product. You have se-
lected a high quality product. The instructions for use
are a part of this product. They contain important
information about safety, use and disposal. Before
using the product, please familiarise yourself with
all the operating and safety instructions. Only use
the product as described and for the indicated pur-
pose. When passing this product on to others please
be sure to also include all of its documentation.

Intended use

The hammer drill and chisel hammer PBH 1050 B2
is suitable for:
- Hammer drilling bricks, concrete and stone
- Chiseling concrete, stone and plaster
- Drilling stone, wood and metal
Any other use or modifying the device is considered
improper use and involves considerable accident risks.
36 GB/MT
Drilling / screwing
Hammer drilling
Chiseling
Chisel position adjustment
Dispose packaging and appliance in
an environmentally-friendly way!
The manufacturer is not liable for damage caused
by improper use.
The device is not intended for commercial use.

Pictured components

Wing screw
1
Clockwise / counter-clockwise switch
2
ON / OFF switch
3
Speed setting
3 a
ON / OFF switch locking button
4
Light emitting diode
5
Function selector switch
6
Release button for function selector switch
6 a
Additional handgrip
7
Tool holder
8
Dust cover
9
Locking sleeve
10
Depth stop (not preinstalled)
11

Scope of delivery

1 Hammer drill PBH 1050 B2
1 Additional handgrip