Adjust The Pad Sensitivity; Change The Note Number Of The Pad; Set The Note Number For Cross Sticking; Resets The Factory Settings - Roland V-Drums Lite HD-3 Manual Del Usuario

Various Settings (the Edit screens)
Parameter
6 Pad Sens
7 MIDI Note No .
8 MIDI X-Stick
10 Factory Reset
16
Value Explanation
This adjusts the sensitivity of each pad. For example if the pad
sensitivity value is raised, even children, whose playing strength
-5 – +5
is less developed will be able to produce maximum volume.
(default: 0)
In step 2 of "Basic Operation in the Edit Screens" (p. 14), strike the
pad whose setting you want to edit. After you've selected the
pad, use [ ][ ] buttons to edit the value.
You can change the MIDI note number of each of the HD-3's
pads.
In step 2 of "Basic Operation in the Edit Screens" (p. 14), strike the
pad whose setting you want to edit. After you've selected the
pad, use [ ][ ] buttons to edit the value.
OFF No note number is assigned.
The selected note number is assigned.
0–127
For the default settings of each pad, refer to "About MIDI" (p. 18).
Here you can select whether the note number that has been set
for SNARE Rim will be output, or note number 37 will be output
when the cross-stick sound is produced.
Choose this setting when you only need rim shot performance
OFF (default) data, when using computer software, games, etc. (The note
number that has been set for SNARE Rim will always be output.)
Choose this setting when sounding an external drum sound
ON module. (Note number 37 will be output when the cross-stick
sound is produced.)
Resets the HD-3 to the factory-set condition.
When "Factory Reset = OK!" appears in the display, press [ ].
When "Sure?" appears, press [ ] again.
If you decide to cancel, press [ ].

Adjust the pad sensitivity

Change the note number of the pad

Set the note number for cross sticking

Resets the factory settings