Panel Descriptions; Front Panel - Roland V-Drums Lite HD-3 Manual Del Usuario

Panel Descriptions

Front Panel

Display
This shows the drum kit, the metronome tempo, and the
value of settings when you're editing them.
[VOLUME] knob
Adjusts the sound level.
Turning the knob to the right to
increases the volume, and to the left,
decreases it.
Kit button ([1]–[10])
For selecting drum kits (p. 11).
Holding down a KIT button for several seconds
will let you hear a demo pattern that uses the
corresponding drum kit (p. 12).
These buttons are also used to select items
during editing (p. 14).
[VARIATION] button
Pressing this button selects a variation
for each drum kit.
Also by holding down the [VARIATION]
button and pressing a kit button, you
can access various edit screens. "Various
Settings (the Edit screens)" (p. 14).
4
Drum Kit Name
Tempo
[POWER] switch
Hold down this switch for several seconds to
turn the HD-3 on/off.
* With the factory settings, the HD-3's
power will automatically be switched off 30
minutes after you stop playing or operating
the unit.
To turn the HD-3 back on, press the [POWER]
switch again.
If you don't want the power to turn off
automatically, change the "AUTO OFF" setting
to "OFF" as described on p. 15.
[ ] (Metronome) button
This starts or stops the metronome (p. 12).
[ ] [ ] button
These adjust the tempo of the metronome or of
the pattern playback. When editing the settings,
use these buttons will be used to change the
values of the selected parameters (p. 14).