Operation; Adjusting Chlorine Output; Set Point - Certikin CTX V35 Instrucciones De Instalación Y Operación

5.0 Operation

During operation, adjustments are made by the SET button.
Timer
Clock

5.1 Adjusting Chlorine Output

Press the SET button to change the chlorine output and the pH of your Pool
Timer
Clock
Press YES to change the output
Timer
Clock
Use the up and down buttons to change the Set Point between 0 and 8. 0 chlorine output should only be used when
there is no salt in the water. In summer, the chlorine should be set between 6 and 8 and you should regularly check your
chlorine level in your swimming pool to determine if the output should be increased or decreased. Rely on your pool
professional for advice on the recommended chlorine level in your pool.
As a guide the free chlorine level should be between 1.0 ppm and 3.0 ppm.
INST322 – CERTIKIN CTX SALT CHLORINATOR Instructions V02_14
POOL SANITISING ON
UNTIL 20:00
SET
CHANGE CHLORINE

SET POINT

YES
SET POINT
ACCEPT
MAINT
NO
6
7