Wall Mounting Instructions; Required Tools - lifeSMART XXHT1141US Manual De Instrucciones

WALL MOUNTING

REQUIRED TOOLS:

Phillips Screwdriver
1 . Using a phillips screw driver, while the unit
is unplugged and placed on a flat surface,
locate and remove the screws securing the
feet on the bottom of the heater .
2 . Determine the best wall location for mounting
the unit .
Note: Choose a location close to an electrical
outlet . Measure the length of the units
power cord to ensure it will reach .
Recommended minimum hanging
height is 12" from the ground to the bot-
tom of the unit . Max hanging height is
36" from the ground to the bottom of the
unit .
If mounting the bracket to dry wall, use the
outside screw slots (See Diagram A) along
with the provided drywall anchors .
If mounting the bracket to a wooden stud,
use the Top Middle and Bottom Middle Screw
slots (Diagram B) . If you choose this option,
you will need to use a screw with min 2"
length (not provided).
3 . Mount unit onto the bracket by positioning the
wall bracket with the heater bracket until the
two pegs align . Then pull down gently to lock
into place .
1
2
A
B
3
14
Standard Level