Cherry ST-1000 U Manual Del Usario página 9

4.2 Windows 98/ME/2000
How to install the software under
Windows NT 98/ME/2000
Precondition: The smartcard
reader must be connect to your PC.
1 Place the Cherry CD in your CD-
ROM drive.
2 If the CD-ROM starts
automatically, cancel this by
pressing the ESC key.
3 From the Copy files from list in
the dialog box Required Files,
select the file *.inf under CD-
ROM Drive/Software/ST-1000U.
4 Click on the button OK.
5 Follow the installation instructions
on the screen.
5 Using the smartcard
reader
5.1 Inserting a smartcard into
the reader
Note: The smartcard is to be
inserted with the contact surfaces
toward the front
You must always insert the
smartcard into the reader with the
contact surfaces toward the front.
Note: Insertion resistance
In order to be able to read the
smartcard, you must push the
smartcard into the reader,
overcoming the insertion resistance.
5.2 Explanation of LED
meanings
When the reader is being used, a
two-colored LED (DUO LED)
functions as a status indicator.
• The green LED illuminates when
the device is detected by the
operating system (enumeration).
• The red LED illuminates when
data is being transferred to or
from the smartcard.
6 Support
We offer free support for problems
which occur during installation of the
Smartcard Reader and the software.
Under http://support.cherry.de,
you can contact the CHERRY
INTERNET SUPPORT SYSTEM
(CISS). There, you can submit your
questions to us directly around the
clock and seven days a week.
If you do not have an Internet
connection, please contact us at the
following address or under the
following telephone or fax numbers:
9