ENGLISH
Proper Insertion and Removal of Eartips
IMPORTANT: Left and Right Headphones
There are Red and Blue colored bands and "L" and "R"
markings on each in-ear headphone. "L" with the Blue band
is for the left ear. "R" with the Red band is for the right ear.
1. You may wish to lightly moisten your eartips
for easier insertion.
2. Using your right hand, grasp the right in-ear headphone.
3. With your left hand, pull up and back on your right ear
to straighten your ear canal.
4. Carefully insert your right in-ear headphone so that it seals
completely and comfortably in your ear. DO NOT insert
the headphone so deeply that your ear canal feels
completely "plugged".
5. Repeat this for your left ear.
6. When you're done listening, remove your Lil' Jamz slowly
with a twisting motion to gradually break the seal.
7
ENGLISH
Lil' Jamz Eartip Fit Testing
A good way to see whether or not the eartip is sealing in your ear canal is by
snapping your fingers next to your ear. If the seal is a good one, your ear will not feel
"plugged," and the snapping of your fingers will sound dull and distant. If you hear
your finger snaps clearly, the seal can probably be better. If the sound of your finger
snapping is dull and distant, but your ear feels plugged up, like you're on an airplane
preparing to land, then you've over-inserted the eartip.
Using The Cable Management Clip
1. Put Lil' Jamz
usually would when listening.
2. Fasten the Cable Management Clip onto your shirt
around the chest or collar area or wherever is most
convenient for the shirt you're wearing.
3. Grab the cable above the Cable Management
Clip and pull it slightly upward, sliding it through
the clip to create enough slack between the in-ear
headphones and clip to allow for head movement
and to take the stress off the in-ear headphones.
in-ear headphones into your ears, as you
™
8