Important Safety Information - Lanaform Luminiscence Manual Del Usario

Tabla de contenido

Publicidad

Thank you for purchasing the LANAFORM® LUMINESCENCE lamp. The LUMINESCENCE lamp works by
using a very clear light source that simulates natural sunlight.
Thanks to the technology and the significant luminous intensity (approx. 10,000 lux at 17 cm)*, the
LUMINESCENCE lamp will help quickly restore your energy and vitality.
You can use the LUMINESCENCE while carrying out other activities such as reading, writing, using
the telephone, or even working.
* Refer to the usage instructions for more detailed information.
ABOUT LIGHT EXPOSURE
Light and its intensity have a major influence on our bodies. The sun's rays are weaker in autumn
and winter. Traditional artificial lighting in buildings is incapable of compensating for this deficit in
natural light.
Numerous healthcare professionals agree on the benefits to the body of exposure to light. By light,
they are referring to daylight of a certain intensity. In winter, light intensity does not exceed 2500
lux*, whereas it can reach 100,000 lux on a clear day in summer.
LANAFORM has developed this light-emitting device specifically to enable you to benefit from an
additional dosage of light during the autumn and winter months.
Exposure to light consists of using a light with a strong lux coefficient* to simulate natural sunlight.
* The lux is the unit of measurement for the luminance of light

IMPORTANT SAFETY INFORMATION

Please read these instructions before using the device. Please also observe these instructions
carefully when using the device.
• Only use this device for the type of use described in this manual.
• This device is not intended for use by persons (including children) with reduced physical, sensory
or mental faculties, or persons lacking in experience or knowledge, unless they are supervised
or given prior instructions on using the device by a person responsible for their safety. Particular
attention must be taken around children to ensure that they do not play with the device.
• Before plugging in the device, check that the voltage indicated on the device corresponds to the
voltage of the local network.
• Do not use accessories that are not recommended by LANAFORM® or that are not supplied with
this device.
• No modifications may be made to this device.
• If the power cable has been damaged, it must be replaced with a similar one available from the
supplier or the supplier's aftersales service.
• Do not use this device if the plug has been damaged, if it is not working properly, if it has fallen
onto the floor, if it has been damaged or if it has fallen into water. Have the device checked and
EN
3

Publicidad

Tabla de contenido
loading

Tabla de contenido