Zyxel PLA-450 Guia De Inicio Rapido página 12

• If a device is Active, it is connected to your network.
• If a device is Out of Network your PLA-450 has the
details of this device but cannot detect it. Check it is
connected to a power outlet and turned on.
• If a device is Not Member, use the Edit icon.
• If a device fails to appear in the table, try adding it in
the Add New Member section. See Troubleshooting
for more suggestions.
7 When you are finished setting up your powerline network,
connect your powerline adapters to the devices you want
on your network, such as computers and a router for
connection to the Internet. See the diagram on page
an example.
6 Configure LAN Settings
Set your PLA-450's IP address to be on your network.
1 Click Network > LAN in the navigation panel.
ENGLISH
12
2 for