For best results, always make sure that both, the trimmer
and the shaving system are in contact with the skin.
When using this function, we recommend using Gillette
shaving foam or gel.
For sensitive areas, we recommend starting with the
sensitive attachment (1a) and then finish with the shaving
system (3).
•
Shave:
For a close shave of stubbled areas with the shaving
system (3)
Pressing the «lock» button, extend the slider (5) as far as
it will go to setting «shave» (picture e).
Place the shaving system (3) on the stretched skin and
gently move it against the direction of hair growth.
Do not apply too much pressure and always keep your
skin stretched.
Make sure the shaving system is in full contact with the
skin.
When using the shaving system, we recommend using
Gillette shaving foam or gel.
Protection sleeve / holder for the shower
The BodycruZer comes with a protection cover that can
also be used as a holder for the appliance when using it in
a shower.
When used as a protection cover, insert the BodycruZer
with the trimmer inside.
When using it as holder, insert the BodycruZer with the
trimmer outside (see picture 9).
Cleaning and maintenance
After each use, clean the BodycruZer.
Remove the trimming comb and brush it out.
You may also use the brush to clean the trimmer if it has
been used for dry applications only.
If you have used The BodycruZer with shaving gel or foam,
rinse it under hot, running water as shown in picture (f).
Shake well to remove excess water and leave to dry.
Apply a drop of light machine oil onto the trimmer on a
weekly basis.
Replacing the shaving system
The shaving system (3) has to be replaced when the orange
stripe becomes discoloured. For best results use with
Gillette M3 POWER cartridges. All MACH3 cartridges fit the
BodycruZer.
Extend the slider, press the release button (4) to eject the
used shaving system.
Insert the appliance into the refill organizer to collect a new
one (g).
In case the BodycruZer has dropped onto the shaving
system, replace the shaving system for safety reasons.
12